Smart Caregiver Low-Cost Basic Exit Alarm Monitor is an affordable, fully functional monitor designed with all SmartCare Giver Corded Pads and Mats

Simply connect the Basic Exit Alarm Monitor to either a bed pad, chair pad, or floor mat.

When pressure is applied to the bed pad or chair pad the caregiver will receive 2 beeps, notifying them that the user has laid or sat down.

When pressure is removed from the bed or chair pad the monitor's alarm will sound.

While using the Exit Alarm monitor with a floor mat, the alarm will sound once pressure has been applied.

Features

Auto-Reset: The Exit Alarm Monitor will automatically reset when the patient's weight is re-applied to the mat or pad

Low Battery Alert: The monitor will flash and alert light to notify the caregiver that its battery level is low.

Adjustable Volume: silent, low, or high alert volume. The silent setting should only be used when the monitor is used with an existing nurse call light system (below).

The Basic Exit Alarm Monitor features a Nurse Call Port:

1. Use optional Nurse Call Cord (NCLA-01), turn volume setting in battery compartment to silent

2. Plug an optional 433-NCA adapter into the Nurse Call Port. Turn the monitor's volume to silent and the monitor's alert signal will be silently sent to a 433 Central Monitoring Unit and Caregiver's Pager.

Mounting Brackets are included to attach to resident's chair or bed

The Low-Cost Basic Exit Alarm Monitor may also be used with Smart Caregiver's line of wheelchair seat belts.

When the seatbelt has been disconnected, the alarm will notify the caregiver, providing valuable time to reach the user.

How Does It Work?

The Bed Exit Alarm and Bed sensor pads are an effective and affordable way to receive an immediate alert that your patient is attempting to leave their bed.

Place a bed sensor pads below the user's back and also their bed's fitted sheet.

Connect the sensor pad's cord to the alarm monitor.

The monitor should be mounted (using included brackets) where the patient is unable to reach.

Once the patient applies pressure, 2 beeps will alert the caregiver that they have entered their bed.

Once pressure is removed, an alarm will sound, alerting the caregiver and depending on your system's set up the patient.

The Chair Exit Alarm and Chair Pad are an easy and effective system to monitor your patients remotely.

Simply place the sensor pad in the seat of their chair. Connect the sensor pad to the chair exit alarm monitor.

Once the user sit downs or applies pressure the caregiver will be notified by 2 beeps.

When pressure is removed the monitor will sound an alarm.

This alarm will then alert the caregiver that their patient is standing up.

Instructions

Smart Caregiver TL-2100B Low-Cost Basic Exit Alarm Monitor Manual

Model Numbers

Manufacturer: Smart Caregiver

Monitor Warranty: 6 Months

Batteries & Power: 9 V Battery (not included) or optional AC Adapter AC-02

Maintenance: Clean the sensor pads with disinfectant wipes or anti-bacterial cleaners

Contact Us

Thank you for visiting LiveOakMed